Visual UpTime Select ASE Default Admin Credentials

The Fluke Networks Visual UpTime Select Analysis Service Element (ASE) (Shodan search) contains default administrator credentials for telnet access according to the manual.

Bring up the login: prompt by pressing Enter one or more times. At the login: prompt, type admin in lowercase and press Enter. At the Password: prompt, type the ASE password (visual in all lowercase is the default password) and press Enter 10 ASE Installation Instructions to bring up the Admin> prompt. For more information about password settings, see “Changing the ASE password.”

Output from a session:

login: admin
Password: ******

Admin> sh

APPFILTER

App Filters are DISABLED.

Application FLOWS and SERVERS will be
collected for all hosts in all subnets.

Local Subnets
==================

CIRCUIT
Circuits In Use = 3 of 155

COMMUNITY

Read-Write Community : private
Public read-only : Yes
Read-Only Community : public

ETHERNET

MAC Address: 00A00E1EAAC5

Interface Eth 1 (SPAN):

Speed: Auto
Actual: 100 Mbps
Duplex: Full

Interface Eth 2 (LAN):

Speed: Auto
Actual: 100 Mbps
Duplex: Full

EVENT

Elapsed Time Event Description
———— —————–
37d-02:39:20 IP Circuit 1030 is Active
37d-02:43:43 IP Circuit 1030 is Inactive
63d-08:34:06 IP Circuit 1030 is Active
63d-21:33:36 IP Circuit 1030 is Inactive
70d-07:29:13 IP Circuit 1030 is Active
70d-07:34:34 Line Status change: LAN interface is UP
70d-07:34:52 Line Status change: WAN interface is UP
70d-07:43:43 IP Circuit 1030 is Inactive
70d-07:44:32 Line Status change: LAN interface is DOWN
70d-07:44:32 Line Status change: WAN interface is DOWN
106d-15:59:13 IP Circuit 1030 is Active
106d-16:03:36 IP Circuit 1030 is Inactive
168d-18:14:14 IP Circuit 1030 is Active
168d-18:18:37 IP Circuit 1030 is Inactive
203d-17:14:14 IP Circuit 1030 is Active
203d-22:03:37 IP Circuit 1030 is Inactive
204d-16:34:06 IP Circuit 1030 is Active
204d-16:43:44 IP Circuit 1030 is Inactive
225d-21:34:06 IP Circuit 1030 is Active
225d-21:36:28 Line Status change: LAN interface is UP
225d-21:36:37 Line Status change: WAN interface is UP
225d-21:44:19 Line Status change: LAN interface is DOWN
225d-21:44:19 Line Status change: WAN interface is DOWN
225d-22:33:36 IP Circuit 1030 is Inactive
229d-18:24:20 IP Circuit 1030 is Active
229d-18:28:43 IP Circuit 1030 is Inactive
235d-18:24:20 IP Circuit 1030 is Active
235d-18:33:36 IP Circuit 1030 is Inactive
236d-17:54:20 IP Circuit 1030 is Active
236d-17:58:43 IP Circuit 1030 is Inactive
241d-16:14:13 IP Circuit 1030 is Active
241d-16:18:36 IP Circuit 1030 is Inactive
241d-20:24:20 IP Circuit 1030 is Active
241d-20:28:43 IP Circuit 1030 is Inactive
260d-03:49:06 IP Circuit 1030 is Active
260d-03:58:44 IP Circuit 1030 is Inactive
334d-23:09:20 IP Circuit 1030 is Active
334d-23:13:43 IP Circuit 1030 is Inactive
420d-10:44:13 IP Circuit 1030 is Active
420d-22:03:36 IP Circuit 1030 is Inactive
438d-15:22:16 Bad SNMP community name from 10.34.43.1
478d-14:24:20 IP Circuit 1030 is Active
478d-14:33:37 IP Circuit 1030 is Inactive
480d-02:34:36 Bad SNMP community name from 10.34.43.1
486d-11:14:13 IP Circuit 1030 is Active
486d-11:18:37 IP Circuit 1030 is Inactive
486d-17:09:19 IP Circuit 1030 is Active
486d-17:18:36 IP Circuit 1030 is Inactive
486d-19:24:19 IP Circuit 1030 is Active

FILTER

Filter Method: MAC

Router
IP Address MAC Dir
—————- —————– —
Filter 1: 10.34.12.253 00:0E:38:EF:E5:08 WAN

ID
Visual UpTime Select IP Transport 10/100 Ethernet Inline ASE

Software version: I 2.5.019 – Feb 20 2007
Serial Number: 0122-0010949
Installed memory: 128M

Protected by U.S. patents: 5,867,483; 5,521,907; 6,058,102;
6,147,998; and 6,564,214.

This product may also be protected by other U.S. or foreign patents.

Copyright (c) 1995-2006 Fluke Corporation(R).
All Rights Reserved.

LAN interface IP Address: 10.34.12.150
LAN interface Subnet Mask: 255.255.255.0
Default Router IP Address: 10.34.12.254

Running for 19 days 21 hours 13 minutes 26 seconds

IP
Management IP address: 10.34.12.150
Management IP subnet mask: 255.255.255.0
SLIP interface address: NONE
SLIP interface subnet mask: NONE
Primary router address: 10.34.12.254

IP Statistics
In Receives: 125806088 Out Requests: 904356
In Delivers: 4243925 Out Discards: 0
In Header Errors: 3 Out No Routes: 0
In Address Errors: 120154348 Reassemble Requests: 8
In Unknown Protocols: 0 Reassemble Oks: 4
In Discards: 0 Reassemble Fails: 0
Datagrams Fragmented: 0 Forwarded Datagrams: 0
Fragments Created: 0
Fragment Fails: 0

LINK

Interface type: Ethernet

PASSWD

SECURITY
The security table is empty

Host address security is DISABLED

SERIAL
Console/SLIP speed : 19200

SITE
NAME:
LOCATION:
CONTACT:

SLA
Inter-ASE messaging: ON
Fixed Local SLA IP Address: 10.34.12.150

SLIP
Connection Type : Dial

SPAN

Span Mode: ON

STATUS
This ASE has been running for 19d-21:13:27.
Ethernet Eth 1 (WAN) link state is up
Ethernet Eth 2 (LAN) link state is up

VLAN

Management VLAN: None (Auto)
SLA VLAN: None

Admin>

Advertisements

Tags: , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: