Archive for March, 2014

Dedicated Micros BX2 DVR Multiple Default Passwords

March 29, 2014

Dedicated Micros BX2 DVRs install with a variety of default credentials according to the manual.

The unit will request a username and password, as defined in the ‘profiles’ configuration file. The default settings are ‘username’ and ‘password’.

User Menu
To enter the User menu tap the Menu key.
Note: If a password has been set and enabled it will be necessary to enter the User password to gain access to the menus. This is disabled by default.

There are a set of default passwords set at the factory. These should be changed as soon as practical to ensure the security of the unit. These default passwords are:
Webpage Configuration : Username = dm Password = web
Video FTP : Username = dm Password = ftp
FTP Admin : Username = dmftp Password = ftp
Telnet : Username = dm Password = telnet
Serial : Username = dmconsole1 No Password as default

Advertisements

Dedicated Micros CMT Default Credentials

March 22, 2014

The Dedicated Micros Centralized Management Tool (CMT) has default passwords according to the manual.

During installation the manual recommends you use a specific password:

Recommended: Enter a Password of dm-cmt1 for the sa logon password above. Be sure to enter dm-cmt1 in both password fields.

Later in the manual it assumes that you followed their advice. This isn’t a default but the wording makes it sound like this is needed!

dm-cmt1

The CMT client application also has a default:

Restart the CMT Client Application and login by entering:
o Username = admin
o Password = admin

Dedicated Micros D4 Default Credentials

March 16, 2014

The Dedicated Micros D4 contains a default password for viewing images via the web and no credentials for the menu system according to the manual.

Viewing Images Across the Network Using a Web Browser
It is possible to use Microsoft Internet Explorer (version 5.X and above) and Netscape Navigator (version 4.7X and above) to view images from a D4. Follow the instructions above to display the D4 web page, but click on the Web Viewer icon instead of the ‘PC viewer application’ icon. It will be necessary to enter a username and password at this point, the default username and password is user and password.

User Password
A password can be set to prohibit unauthorized access to the menu systems. The default setting is Off.

Dedicated Micros Digital Sprite 2 Default Web Credentials

March 8, 2014

I previously wrote about the Dedicated Micros Sprite 2 (DS2) and one set of default credentials it had. The Setup Manual has another set of default credentials this time for the web server:

If a password has been configured it will be necessary to enter the Username and Password information to gain access to the unit. The default user name and password are dm and web.

Dedicated Micros DV-IP Series Devices Default Credentials

March 1, 2014

Dedicated Micros makes a set of devices under the DV-IP label. In some cases they do not require passwords to access. In other cases they come with default accounts. Below is a list of devices with links to the manual and quoted bits about passwords.

DV-IP ATM

Select Configuration Options. The unit will prompt for a username and password. The default settings are dm and web respectively.

DV-IP Codec

The image shows the User Accounts Administration page. The default passwords are:
Webpage Configuration : Username = dm : password = web
FTP Admin : Username = dmftp : password = ftp
Telnet : Username = dm: password = telnet

DV-IP Encoder

The image shows the User Accounts Administration page. The default passwords are:
Webpage Configuration : Username = dm : password = web
FTP Admin : Username = dmftp : password = ftp
Telnet : Username = dm: password = telnet

DV-IP Express

By default, no Usernames and Passwords are required to access any of the various menus. Usernames and Passwords can however be added to regulate access to the Configuration and Viewer menus.

DV-IP Server

dvip-1

DV-IP NV1 & NV4

By default, no Usernames and Passwords are required to access any of the various menus. Usernames and Passwords can however be added to regulate access to the Configuration and Viewer menus, refer to the ‘Display Settings-> User Accounts’ menu for information on establishing Usernames and Passwords