LC3000 Laundry Reader Default Telnet Password

Blackboard Inc. makes a product called LC3000 Laundry Reader that may not be produced anymore. According to a manual though it has a default password for the telnet interface which gets you access to interesting functions:

Log in using the default password: IPrdr4U.
The password is case sensitive. Consider changing the password.

df:/tmp # telnet 1.2.3.4
Trying 1.2.3.4…
Connected to 1.2.3.4.
Escape character is ‘^]’.

Blackboard LC3000 Configuration

Enter Password > *******

LC3000 V4.9

Command Reference –

config – Configure network parameters
showconfig – Display current configuration
status – Display reader status
ping – Ping another IP device
netstats – Display network statistics
netclear – Clear network statistics counters
password – Change config utility password
ipreboot – Reboot reader
exit – Log out of session

Type command, followed by ‘Enter’ key > showconfig

Model: LC3000

Serial Number: 5016014
MAC Address: 08-00-6a-0e-3e-8e

Communication Mode: IP

DHCP Config: Enabled
IP Address: 1.2.3.4 (via DHCP)
Subnet Mask: 255.255.255.0 (via DHCP)
Default Router/Gateway: 1.2.3.1 (via DHCP)
NP/Host IP Address: 1.2.3.4 (local)
Telnet Access: Enabled

Comment:

Volume: 6
Contrast 10
Backlight: high
Service card access: Enabled

Type command, followed by ‘Enter’ key > status

LC3000 Status:

Last power-up: 05/25/13 16:14:56
Current Time: 10/26/13 16:10:07

On-Line

Last communicated with NP/Host 6 seconds ago.

Software Versions:
LC3000IP V4.9
LCM20 V1.0
LWI V1.2

Type command, followed by ‘Enter’ key > netstats

LC3000 Network Statistics:

Last power-up: 05/25/13 16:14:56
Network counters last cleared: 05/25/13 16:14:56

Link: 100 Mbps Half duplex

Transmit Statistics:
Frames Ok………. 300038 Deferred…………. 79
Single Collisions.. 10 Late Collisions…… 0
Multiple Collisions 37 Excessive Collisions. 0
Underrun……….. 0 Carrier Lost……… 0

Receive Statistics:
Frames Ok………. 4805569 Dropped Frames……. 0
Alignment Error…. 0 CRC Error………… 0
Overrun………… 1902 Truncated………… 0
Max Frames Length.. 0 Babbling…………. 0
Bus Error………. 0

Type command, followed by ‘Enter’ key > exit

Exiting Configuration Utility . . .

Connection closed by foreign host.
df:/tmp #

Tags: Defaults, Shodan, Telnet